Flutset GE-DP 7535 N LL 20

The Einhell flood set GE-DP 7535 N LL 20 is ready for immediate use in just a few simple steps in case of high water levels and flooding. The Einhell dirt water pump GE-DP 7535 N LL is a 2-in-1 pump and can be used for both clear and dirty water. One pump for two tasks: shallow suction down to 1 mm residual water level in clear water operation, or pumping dirty water with particle sizes of up to 35 mm. The 2-in-1 pump impresses with higher power: With 750 watts of power, the pump conveys up to 18,500 litres of water per hour. It can pump water to a maximum delivery height of 9 m. The infinitely variable float switch offers the choice between continuous operation and pre-configured switch-on and switch-off levels. The dry-running protection connected to the float switch ensures that the motor only works when the dirt water pump is in the water and thus prevents damage to the device. The pump can be started with water levels of 15 mm or deeper. With the suction level being regulated via a simple rotary movement, the desired power can be adjusted quickly. The lifting eyelets can be used to attach a rope to the pump, allowing the pump to be lowered into the water easily and in a controlled manner. The rugged, stainless-steel pump housing and the high-quality mechanical seal can reliably handle even tough dewatering jobs and guarantee a long service life. The practical carrying handle means this 2-in-1 combination pump is quickly and easily and quickly ready for use anywhere and ready to respond immediately in case of flooding. The Einhell flood set GE-DP 7535 N LL 20 consists of the 2-in-1 dirty water pump with a universal adapter for 25/38 mm and 33.3 mm (1" external thread), two 10-m-long fabric hoses with five quick couplings, one quick connector, and a plastic case that prevents clogging.