minutes reading time
Cordless Hoist
TE-EH 18/250 Li BL-Solo
Item no:2255161EAN: 4006825685930
einhell-expert-cordless-hoist-2255161-productimage-001
einhell-expert-cordless-hoist-2255161-accessory-001
einhell-expert-cordless-hoist-2255161-pxc_circle-001
einhell-expert-cordless-hoist-2255161-example_usage-001
einhell-expert-cordless-hoist-2255161-detail_image-001
einhell-expert-cordless-hoist-2255161-detail_image-002
einhell-expert-cordless-hoist-2255161-detail_image-003
einhell-expert-cordless-hoist-2255161-detail_image-005
einhell-expert-cordless-hoist-2255161-pxc_matrix-001
einhell-expert-cordless-hoist-2255161-productimage-001
einhell-expert-cordless-hoist-2255161-accessory-001
einhell-expert-cordless-hoist-2255161-pxc_circle-001
einhell-expert-cordless-hoist-2255161-example_usage-001
einhell-expert-cordless-hoist-2255161-detail_image-001
einhell-expert-cordless-hoist-2255161-detail_image-002
einhell-expert-cordless-hoist-2255161-detail_image-003
einhell-expert-cordless-hoist-2255161-detail_image-005
einhell-expert-cordless-hoist-2255161-pxc_matrix-001
Cordless Hoist

TE-EH 18/250 Li BL-Solo

Item no: 2255161 EAN: 4006825685930
  • A member of the Power X‑Change family; 1 x 18 V battery required
  • Brushless motor – more power and longer running time
  • Handle with rocker switch for intuitive operation
  • Central emergency stop switch for maximum safety
  • Automatic limit switch at upper and lower end positions
  • Pulley with hook supporting double the load weight
  • 12-m-long, twist-free steel cable with coloured end indicator
  • Carrying handle for ease of transport and portable use
  • Restart protection for safety, for example after replacing the battery
  • Load brake for increased safety in the event of a power failure
  • Long service life thanks to thermal protection and overload protection
  • Incl. 2 x double clamps for quick installation
  • Incl. mounting hook for round pipes
  • Battery and charger not included (available separately)
See more information
Show less information
Total 199.95199.95 EUR*
Configure your set
Starter Kit
PXC-Starter-Kitincl. 4,0Ah Battery + Charger Item no: 4512042
RRP 69.950.00
PXC-Starter-Kitincl. 4,0Ah Plus Battery + Charger Item no: 4512159
RRP 90.950.00
PXC-Starter-Kitincl. 5,2Ah Battery + Charger Item no: 4512147
RRP 105.950.00
PXC-Starter-Kitincl. 4-6Ah Battery + Boostcharger Item no: 4512143
RRP 145.950.00
Accessories
Hoist Lever Armincl. SA 1100 swivel arm Item no: 2255398
RRP 64.950.00
Attention!

Currently, no orders can be placed in the online shop.

Please try again later or check your firewall/ad-blocker settings.

Cordless Hoist
TE-EH 18/250 Li BL-Solo
Item no: 2255161 EAN: 4006825685930
  • A member of the Power X‑Change family; 1 x 18 V battery required
  • Brushless motor – more power and longer running time
  • Handle with rocker switch for intuitive operation
  • Central emergency stop switch for maximum safety
  • Automatic limit switch at upper and lower end positions
  • Pulley with hook supporting double the load weight
  • 12-m-long, twist-free steel cable with coloured end indicator
  • Carrying handle for ease of transport and portable use
  • Restart protection for safety, for example after replacing the battery
  • Load brake for increased safety in the event of a power failure
  • Long service life thanks to thermal protection and overload protection
  • Incl. 2 x double clamps for quick installation
  • Incl. mounting hook for round pipes
  • Battery and charger not included (available separately)
See more information
Show less information
einhell-expert-cordless-hoist-2255161-productimage-001
Article description

The Einhell cordless wire rope hoist TE-EH 18/250 Li BL provides powerful lifting and controlled lowering of heavy loads – flexibly and completely cordless. As member of our Power X-Change family, the electric cable hoist can be used in combination with any battery or charger from the system series. A high-performance Brushless motor reliably powers the device. Heavy workpieces, materials and machine components with loads of up to 125 kg can be moved safely and precisely. The load capacity can be doubled to up to 250 kg using the supplied pulley. The 12-metre-long, twist-free steel cable with colour-coded end indicator allows a maximum lifting height of 12 metres at a lifting speed of 3.5 metres per minute. The device can be conveniently operated via an ergonomic handle with a rocker switch: When the switch is pressed upwards, the hook lifts the load; when pressed downwards, it is lowered. The lifting process stops automatically when the switch is in the neutral position. For added safety, a central emergency stop switch is built-in, allowing the device to be deactivated immediately. The automatic end stop prevents the rope from being pulled up or down too far. The mechanical load brake engages in the event of a interruption of the power supply, for example when the battery is empty, and prevents the load from descending uncontrollably. Thermal and overload protection provide additional protection for the motor and system. The flexible mounting options are particularly practical for mobile use: The cordless winch can be easily suspended from round pipes, for example in scaffolding, using the mounting hook supplied. Alternatively, the device can be installed on a swivel arm or other compatible fixture using the two double clamps. Thanks to battery operation, the wire rope hoist can be used anywhere, independent from any power source in the garage, workshop or warehouse. The carrying handle makes it easy to transport it to the respective working location. Supplied without battery and charger. These are available separately.

See more information
Show less information
full_width_image

Easy to use

Intuitive control with ergonomic handle

The cordless wire rope hoist is conveniently operated via an ergonomic handle with a three-setting rocker switch: When the switch is pressed upwards, the hook lifts together with the load; when pressed downwards, the hook is lowered – in neutral position, the process stops automatically. The electric winch offers a lifting height of up to 12 m at a maximum lifting speed of 3.5 m/min. A central emergency stop switch provides additional safety.

The Einhell cordless hoist TE-EH 18/250 Li BL is operated with an ergonomic handle and rocker switch while lifting a plant.
The Einhell cordless hoist TE-EH 18/250 Li BL lifts a bucket of stones in a timber frame, operated by a man.

12 m wire rope with 125 kg load capacity

The 12-metre-long, twist-free steel wire rope with colour-coded rope ends enables safe and controlled lifting and lowering of loads up to 125 kg. The robust rope guiderail ensures reliable support at all times.

The Einhell cordless hoist TE-EH 18/250 Li BL lifts a power generator in a hall, controlled by a man.

250 kg load capacity with pulley

By using the supplied pulley with the sturdy load hook, the electric winch can carry double the load capacity, up to 250 kg. This makes the hoist ideal for moving particularly heavy workpieces, machines or building materials.

Cordless liftingFlexible use without the need for a power socket

The Einhell cordless rope hoist TE-EH 18/250 Li BL lifts heavy loads with ease – safely, flexibly and without the need for a power supply in workshops, warehouses and garages, thanks to the Power X-Change system with 18 V battery. Supplied without battery and charger. These are available separately.

Move loads safely

Reliable protective features for every application

The automatic limit switch ensures a high level of safety during use, reliably stopping the rope during lifting and lowering – thus preventing it from being pulled up or down too far. In the event of an interrupted power supply, for example due to an empty battery, the mechanical load brake engages and prevents the load from being lowered uncontrollably.

The Einhell cordless hoist TE-EH 18/250 Li BL lifts a plant in a stairwell while a man guides it below.
Graphic: Max. running time per battery charge, 1 x 2,0 Ah - 12 h, 1 x 2,5 Ah - 15 h, 1 x 3,0 Ah - 16 h, 1 x 4,0 Ah - 18 h, 1 x 5,2 Ah - 24 h, 1 x 6,0 Ah - 31 h, 1 x 8,0 Ah - 48 h
Graphic: Max. running time per battery charge, 1 x 2,0 Ah - 12 h, 1 x 2,5 Ah - 15 h, 1 x 3,0 Ah - 16 h, 1 x 4,0 Ah - 18 h, 1 x 5,2 Ah - 24 h, 1 x 6,0 Ah - 31 h, 1 x 8,0 Ah - 48 h

Manufacturer information

Einhell Germany AG
Wiesenweg 22
94405 Landau/Isar
Germany
[email protected]

Einhell customer service can be reached directly. We take care of your requests for product information, spare parts and repairs.We support you with all questions around your product - before, during and after the purchase.

Customer reviews

Einhell does not ensure - with the exception of the "Verified Purchase" cases - that the published reviews come from such consumers who have actually used or purchased the products.