Show more

Firmware update

Always keep your robot lawn mower up to date

As a general rule, do not confuse the mower firmware update with updates to the Einhell Connect App. If the app receives an update, this does not have to be transferred to the mower (currently it is also not possible to update the mower via the app). If an update of the mower becomes necessary, you can download it from the section below (the BIN file does not need to be unzipped).

test
Find out more

Here you will find the appropriate firmware update for your robot lawn mower

GC-RM 500

How to update the firmware


  1. Please read the article and ID number from the type plate of your robotic lawnmower and make a note of it for downloading the firmware.
    Note: The firmware differs depending on the IDENT number!
  2. Load the file onto an empty USB stick and plug it into the USB port on the rear of the mower.
  3. Before you start installing the firmware update, place the robotic lawnmower in the mowing area. The robotic lawnmower must not be in the charging station during the software update.
  4. Activate the main switch on the mower and start the boot mode by pressing the "Power" and "OK" buttons simultaneously for 4 seconds. In boot mode all LEDs light up.
  5. Then start the update process by pressing the lock key. The LEDs indicate the progress of the update, which may take several minutes. Do not switch off the robot lawn mower during the process. A successful update is confirmed by an acoustic signal.
  6. After restarting the mower via the main switch, it can resume its work. Do not forget to remove the USB stick again

Files for download


Article Number Ident-Number Firmware Date Filesize Format Download
3413930 21020 DM05273_1123 19/02/2021 243KB BIN Download now
3413930 11019 DM00273_1123 19/02/2021 243KB BIN Download now

Freelexo without display

Model A




How to update the firmware


  1. Please read the article and IDENT number from the type plate of your robotic lawnmower and make a note of it for downloading the firmware.
    Note: The firmware differs depending on the IDENT number!
  2. Load the file onto an empty USB stick and plug it into the USB port on the rear of the mower.
  3. Before you start installing the firmware update, place the robotic lawnmower in the mowing area. The robotic lawnmower must not be in the charging station during the software update.
  4. Activate the main switch on the mower and start the boot mode by pressing the "Power" and "OK" buttons simultaneously for 4 seconds. In boot mode all LEDs light up.
  5. Then start the update process by pressing the lock key. The LEDs indicate the progress of the update, which may take several minutes. Do not switch off the robot lawn mower during the process. A successful update is confirmed by an acoustic signal.
  6. After restarting the mower via the main switch, it can resume its work. Do not forget to remove the USB stick again

Files for download


Article number Ident-number Firmware Date Filesize Format Download
3413941
3413942
3413943
3413940
4326363
21020 EC10343 09/06/2021 247KB BIN Download now
3413941
3413944
3413945
3413946
3413947
3413948
3413949
21010 EC10343 09/06/2021 247KB BIN Download now
3413941
3413942
3413943
3413940
4326363
11019 DM10343 09/06/2021 247KB BIN Download now


Model B




How to update the firmware


  1. Load the file onto an empty USB stick.
  2. Before you start installing the firmware update, place the robotic lawnmower in the mowing area. The robotic lawnmower must not be in the charging station during the software update.
  3. Open the cover and insert the USB stick into the USB port on the bottom of the mower.
  4. Turn on the main switch on the mower and the update process starts automatically. The time LEDs start flashing.
  5. The process is complete when all 4 time LEDs light up continuously and the mower emits a continuous whistling sound.
  6. Do not forget to remove the USB stick and close the cover.

Files for download


Artikelnummer Ident-Nummer Firmware Version Dateigröße Format Download
3413961
3413962
21010 RM03PR_11_40* 03.11.40.3 236KB BIN Download now

* Note: The name of the firmware file remains the same from version to version!

Freelexo with display

Model A




How to update the firmware


  1. Please read the article and ID number from the type plate of your robotic lawnmower and make a note of it for downloading the firmware.
    Note: The firmware differs depending on the IDENT number!
  2. Load the file onto an empty USB stick and insert it into the USB port on the back of the mower.
  3. Before you start installing the firmware update, place the robotic lawnmower in the mowing area. The robotic lawnmower must not be in the charging station during the software update.
  4. Turn on the main switch on the mower and start the boot mode by pressing the 'Power' and 'OK' buttons simultaneously for 4 seconds.
  5. Then start the update process by pressing button 3. The display shows the progress of the update process, which may take several minutes. Do not switch off the robotic lawnmower during the update. A successful update is confirmed by an acoustic signal.
  6. After restarting the mower via the main switch, it can start working again. Do not forget to remove the USB stick.

Files for download


Article number Ident-number Firmware Date Filesize Format Download
3413950
3413951
3413952
4326368
21020 EC11343 09/06/2021 247KB BIN Download now
3413951
3413953
3413955
21010 EC11343 09/06/2021 247KB BIN Download now
3413950
3413951
3413952
4326368
11019 DM11343 09/06/2021 247KB BIN Download now


Model B




How to update the firmware


  1. Load the file onto an empty USB stick.
  2. Before you start installing the firmware update, place the robotic lawnmower in the mowing area. The robotic lawnmower must not be in the charging station during the software update.
  3. Open the cover and insert the USB stick into the USB port on the bottom of the mower.
  4. Turn on the main switch on the mower and the update process starts automatically. The robotic lawnmower displays the current status of the firmware update.
  5. After the software has been copied completely, the robotic lawnmower switches to normal operating mode and the process is complete.
  6. Do not forget to remove the USB stick and close the cover.

Files for download


Article number Ident-number Firmware Version Filesize Format Download
3413980
3413981
21010 RM05PR_11_40* 05.11.40.3 236KB BIN Download now

* Note: The name of the firmware file remains the same from version to version!

Einhell Connect Control your Einhell robot lawn mower conveniently via the smartphone app

Frequently asked questions

How do I find out about software updates?

• The manufacture will inform you of these via email/their website.
• The app will inform you about new updates. If no update is available in the App, this means that your mower is up to date.

How can I update the robot's software?

The update must be installed on the mower by the user. The update process depends on the model of the robot lawn mower.

GC-RM 500/Freelexo

  1. To do this, load the update file onto an empty USB stick, insert in into the mower's USB port and start the mower's boot mode by pressing and holding the "Power" and "OK" buttons at the same time for 4 seconds.
  2. Then start the update process by pressing the locking button.
  3. The LEDs will indicate the progress of the update. Do not switch off the robot lawn mower during the process. After this process, the robot lawn mower will switch back to normal operating mode.
  4. After successfully updating the software, restart the robotic lawnmower once, using the main switch and then on again.
  5. Do not forget to remove the USB stick again afterwards.

 

Freelexo+

  1. To do this, load the update file onto an empty USB stick, insert in into the mower's USB port and start the mower's boot mode by pressing and holding the "Power" and "OK" buttons at the same time for 4 seconds.
  2. Then start the update process by pressing the locking button.
  3. The LEDs will indicate the progress of the update. Do not switch off the robot lawn mower during the process. After this process, the robot lawn mower will switch back to normal operating mode.
  4. After successfully updating the software, restart the robotic lawnmower once, using the main switch and then on again.
  5. Do not forget to remove the USB stick again afterwards.

Can the mower be reset to factory settings?

The mower itself cannot be reset to factory settings, but this is usually not necessary. Software updates can be found on the website, but do not have to be downloaded. In the app you can delete your mower and your personal data and reset the statistics.